{"id":484,"date":"2026-01-15T02:07:58","date_gmt":"2026-01-15T02:07:58","guid":{"rendered":"https:\/\/abrasive-paper.com\/?post_type=product&p=484"},"modified":"2026-02-26T08:25:44","modified_gmt":"2026-02-26T08:25:44","slug":"wood-cutting-blades-tct","status":"publish","type":"product","link":"https:\/\/abrasive-paper.com\/ru\/product\/wood-cutting-blades-tct\/","title":{"rendered":"\u0414\u0438\u0441\u043a\u0438 \u043f\u043e \u0434\u0435\u0440\u0435\u0432\u0443 (TCT, \u0442\u0432\u0435\u0440\u0434\u043e\u0441\u043f\u043b\u0430\u0432\u043d\u044b\u0435)"},"content":{"rendered":"

\u041f\u043e\u0437\u0438\u0446\u0438\u043e\u043d\u0438\u0440\u043e\u0432\u0430\u043d\u0438\u0435 \u043f\u0440\u043e\u0434\u0443\u043a\u0442\u0430<\/b><\/strong><\/h4>\n
\u00a0Result-driven cutting tool for woodworking\u2014built for throughput, visible-edge finish and batch consistency<\/h6>\n

Wood cutting blades (TCT) are key cutting tools that convert variability\u2014from material, machine, and operator\u2014into controlled, repeatable results. For procurement and process owners, blades are not just consumables; they influence takt time, rework rate, yield, and operator experience (noise\/dust).<\/strong>
\nThis series targets common wood materials (solid wood, plywood, finger-joint boards, soft\/hard woods) with priorities on clean cuts, reduced chipping\/burrs\/burn marks, and longer sharpening intervals.<\/strong><\/p>\n

————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

\u0422\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0438\u0435 \u0445\u0430\u0440\u0430\u043a\u0442\u0435\u0440\u0438\u0441\u0442\u0438\u043a\u0438<\/b><\/strong><\/h4>\n
Define a wood blade by six factors: diameter, bore, tooth count, geometry, kerf and plate stability<\/h6>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

\u0421\u043f\u0435\u0446\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f <\/b><\/strong><\/p>\n<\/td>\n

Notes<\/b><\/strong><\/td>\n<\/tr>\n
\u0414\u0438\u0430\u043c\u0435\u0442\u0440<\/b><\/strong><\/td>\n\n

110\u2013450 mm typical (depending on equipment platform)<\/p>\n<\/td>\n<\/tr>\n

\n

Bore\/Arbor<\/b><\/strong><\/p>\n<\/td>\n

20 \/ 22.23 \/ 25.4 \/ 30 mm (bushings available)<\/td>\n<\/tr>\n
Tooth Count<\/b><\/strong><\/td>\n\n

18T\u2013120T (application dependent)<\/p>\n<\/td>\n<\/tr>\n

\n

Tooth Geometry<\/b><\/strong><\/p>\n<\/td>\n

ATB \/ FTG \/ Combo (TCG available for sheet goods)<\/td>\n<\/tr>\n
Hook Angle<\/b><\/strong><\/td>\n\n

Low \/ Mid \/ High (affects feed rate and pull tendency)<\/p>\n<\/td>\n<\/tr>\n

\n

Kerf<\/b><\/strong><\/p>\n<\/td>\n

Thin Kerf \/ Standard Kerf (balances power vs. stability)<\/td>\n<\/tr>\n
Plate Thickness<\/b><\/strong><\/td>\n\n

Interlinked with kerf (trade-off between stability & energy)<\/p>\n<\/td>\n<\/tr>\n

\n

Runout<\/b><\/strong><\/p>\n<\/td>\n

Lower is better for cut quality and tool life (Critical QC item)<\/td>\n<\/tr>\n
Noise & Vibration<\/b><\/strong><\/td>\n\n

Laser-cut silencing slots \/ Expansion slots (Optional)<\/p>\n<\/td>\n<\/tr>\n

\n

\u041c\u0430\u043a\u0441. \u043e\u0431\/\u043c\u0438\u043d (Max RPM)<\/b><\/strong><\/p>\n<\/td>\n

\n

Rated by diameter and design (Must match equipment)<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

Key Features<\/b><\/strong><\/h4>\n
Cleaner cuts, controlled heat, stable life and predictable sharpening cycles<\/b><\/strong><\/h6>\n
    \n
  • Finish quality<\/strong>:<\/b><\/strong>\u00a0reduced burrs, tear-out, and edge chipping for visible-edge applications;<\/li>\n
  • \u041a\u043e\u043d\u0442\u0440\u043e\u043b\u044c \u0442\u0435\u043f\u043b\u0430<\/strong>: <\/b><\/strong>geometry\/kerf paired with feed strategy to reduce burning and resin build-up;<\/li>\n
  • Stability<\/strong>:<\/b><\/strong>\u00a0plate stability and runout control improve cut pattern consistency and tip life;<\/li>\n
  • Repeatability<\/strong>: <\/b><\/strong>consistent batches reduce setup time and the \u201csame spec, different performance\u201d issue.<\/li>\n<\/ul>\n

    ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

    \u041b\u043e\u0433\u0438\u043a\u0430 \u043e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0438<\/b><\/strong><\/h4>\n
    Define the goal first (rip vs finish), allocate load via geometry\/tooth count, then secure results with kerf and stability<\/h6>\n

    Wood cutting trades off throughput vs heat\/tear-out risk. Fine finishing uses higher tooth count but changes load and noise behavior. Engineering control comes from:<\/b><\/strong><\/p>\n

      \n
    • Geometry<\/strong>:<\/b><\/strong>\u00a0ATB favors clean crosscuts; FTG favors ripping and chip evacuation; Combo balances;<\/li>\n
    • Tooth count<\/strong>:<\/b><\/strong>\u00a0fewer teeth = higher chip load per tooth (fast but rougher); more teeth = lower chip load (finer but needs stability);<\/li>\n
    • Kerf & plate stability<\/strong>:<\/b><\/strong>\u00a0thin kerf reduces power demand but needs stable setups; standard kerf offers robustness at higher energy cost.<\/li>\n<\/ul>\n

      ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

      Machine Compatibility<\/h4>\n
      Machine type sets the stability threshold\u2014handheld needs smooth control, table saws need runout\/straightness, lines need life & sharpening cadence<\/h6>\n
        \n
      • Handheld circular saws<\/strong>: <\/strong>thin kerf and low vibration for smoother control and reduced kickback tendency;<\/li>\n
      • Miter\/table\/panel saws<\/strong>:<\/strong>\u00a0plate stability and low runout for consistent edges;<\/li>\n
      • Production station<\/strong>s<\/strong>:<\/strong>\u00a0focus on predictable life and re-sharpenability to manage tool-change intervals.<\/li>\n<\/ul>\n

        ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

        \u0418\u043d\u0436\u0435\u043d\u0435\u0440\u043d\u043e\u0435 \u0441\u0440\u0430\u0432\u043d\u0435\u043d\u0438\u0435<\/b><\/strong><\/h4>\n
        Geometry Comparison\uff1a<\/b><\/strong><\/h5>\n

        Wrong geometry\/tooth count often looks like \u201cmaterial issues\u201d but is a tool-match problem<\/strong><\/p>\n

          \n
        • ATB<\/strong>:<\/b><\/strong>\u00a0cleaner crosscuts, reduced tear-out for visible edges;<\/li>\n
        • FTG<\/strong>:<\/b><\/strong>\u00a0efficient ripping with strong chip evacuation;<\/li>\n
        • Combo<\/strong>:<\/b><\/strong>\u00a0general-purpose choice for broad applications.<\/li>\n<\/ul>\n
          Thin Kerf vs Standard Kerf<\/b><\/strong><\/h5>\n

          Thin kerf reduces power demand but needs stable setups; standard kerf is more forgiving with higher cutting resistance.<\/strong><\/p>\n

          ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

          \u0422\u0438\u043f\u043e\u0432\u044b\u0435 \u043f\u0440\u0438\u043c\u0435\u043d\u0435\u043d\u0438\u044f \u0438 \u043e\u0442\u0440\u0430\u0441\u043b\u0438<\/b><\/strong><\/h4>\n
          From panels to solid wood\u2014ripping, crosscutting, finish cutting and pre-cutting before assembly<\/b><\/strong><\/h6>\n
            \n
          • Furniture, Cabinetry, Doors<\/strong><\/li>\n
          • Windows components, Pallets<\/strong><\/li>\n
          • Crates, Interior carpentry, and Wood<\/strong><\/li>\n
          • Panel processing<\/strong><\/li>\n<\/ul>\n

            ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

            \u0414\u0438\u0430\u043f\u0430\u0437\u043e\u043d \u0438 \u0440\u0435\u043a\u043e\u043c\u0435\u043d\u0434\u0443\u0435\u043c\u043e\u0435 \u043f\u0440\u0438\u043c\u0435\u043d\u0435\u043d\u0438\u0435<\/b><\/strong><\/h4>\n
            Select by goal\u2013material\u2013machine\u2013finish requirement, not tooth count alone<\/h6>\n
              \n
            • Ripping\/throughput<\/strong>:<\/b><\/strong>\u00a0FTG or lower tooth count for chip evacuation;<\/li>\n
            • Visible-edge finis<\/strong>h<\/b><\/strong>:<\/b><\/strong>\u00a0ATB or higher tooth count for cleaner cuts;<\/li>\n
            • General purpos<\/strong>e<\/b><\/strong>:<\/b><\/strong>\u00a0Combo reduces mismatch and claims;<\/li>\n
            • Resinous wood<\/strong>s<\/b><\/strong>: <\/b><\/strong>manage feed\/RPM and choose designs that evacuate chips and reduce heat.<\/li>\n
            • One-line rule:<\/b><\/strong>\u00a0Task first \u2192 geometry\/tooth count \u2192 kerf based on machine stability.<\/li>\n<\/ul>\n

              ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

              Customization (OEM\/ODM)<\/h4>\n
              Full OEM\/ODM\u2014from specs and geometry to noise-control design and private label packaging<\/h6>\n

              OEM\/ODM: <\/strong><\/p>\n

              Diameter, bore, tooth count, geometry, hook angle, kerf, plate thickness, noise-control slots\/plugs, coatings (if required), printing\/private label packaging, barcodes and assortment kits.<\/strong><\/p>\n

              ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

              \u041f\u043e\u0447\u0435\u043c\u0443 \u0432\u044b\u0431\u0438\u0440\u0430\u044e\u0442 \u043d\u0430\u0441<\/h4>\n
              Reduce claims with repeatability\u2014stable supply, clear selection rules and standardized assortments<\/h6>\n

              We focus on assortments and repeatability: practical selection rules reduce mismatch\/returns, while consistent batches and reliable delivery reduce setup and complaint costs. Saw blades can also complement your abrasives portfolio to support a one-stop \u201ccut + finish\u201d offering.<\/strong><\/p>\n

              ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

              \u0420\u0435\u043a\u043e\u043c\u0435\u043d\u0434\u0430\u0446\u0438\u0438 \u043f\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u0438\u044e \u0438 \u0445\u0440\u0430\u043d\u0435\u043d\u0438\u044e<\/h4>\n
              Correct mounting and feed rate often matter more than a higher-priced blade<\/strong><\/h6>\n
                \n
              • \u041a\u0440\u0435\u043f\u043b\u0435\u043d\u0438\u0435<\/strong>: <\/b><\/strong>ensure bore fit, clean clamping faces, intact flanges; guard on; never exceed RPM rating;<\/li>\n
              • Feed<\/strong>: <\/b><\/strong>avoid forcing the cut\u2014heat causes burning; adjust feed\/RPM\/blade match first;<\/li>\n
              • Maintenance<\/strong>: <\/b><\/strong>re-sharpen\/replace when dull to prevent plate deformation;<\/li>\n
              • Storage\/shipping<\/strong>: <\/b><\/strong>keep dry; protect teeth; avoid compression and impact.<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

                \u041e\u0431\u0437\u043e\u0440 \u043f\u0440\u043e\u0434\u0443\u043a\u0442\u0430<\/b><\/strong><\/h4>\n
                Steel plate + carbide tips + geometry\/tooth count\/kerf as a system\u2014where \u201cfast\u201d and \u201cclean\u201d can coexist<\/h6>\n
                TCT circular saw blade solutions for ripping and crosscutting\u2014engineered for repeatable balance of speed, finish quality and blade life<\/h6>\n

                Blade performance is driven by three engineering layers:<\/b><\/strong><\/p>\n

                  \n
                • Plate\/body<\/strong>: <\/b><\/strong>steel\/heat treatment, tensioning, and runout control define high-speed stability and vibration resistance;<\/li>\n
                • Carbide tips<\/strong>:<\/b><\/strong>\u00a0grade and brazing quality define wear resistance, chip resistance, and re-sharpenability;<\/li>\n
                • Geometry<\/strong>:<\/b><\/strong> tooth form (ATB\/FTG\/Combo, expandable to TCG), tooth count, hook\/clearance angles, and kerf define load, chip evacuation, finish quality, and heat generation.<\/li>\n<\/ul>\n

                  That\u2019s why blades with identical diameter\/tooth count can behave very differently\u2014the real gap is stability and consistency.<\/b><\/strong><\/p>","protected":false},"featured_media":1259,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[111],"product_tag":[],"class_list":{"0":"post-484","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-wood-cutting-blades-tct","8":"first","9":"instock","10":"shipping-taxable","11":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product\/484","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/comments?post=484"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/media\/1259"}],"wp:attachment":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/media?parent=484"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product_brand?post=484"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product_cat?post=484"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product_tag?post=484"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}