{"id":487,"date":"2026-01-15T02:42:01","date_gmt":"2026-01-15T02:42:01","guid":{"rendered":"https:\/\/abrasive-paper.com\/?post_type=product&p=487"},"modified":"2026-02-10T07:21:25","modified_gmt":"2026-02-10T07:21:25","slug":"aluminum-non-ferrous-blades-tct","status":"publish","type":"product","link":"https:\/\/abrasive-paper.com\/ru\/product\/aluminum-non-ferrous-blades-tct\/","title":{"rendered":"\u0414\u0438\u0441\u043a\u0438 \u043f\u043e \u0430\u043b\u044e\u043c\u0438\u043d\u0438\u044e\/\u0446\u0432\u0435\u0442\u043d\u044b\u043c \u043c\u0435\u0442\u0430\u043b\u043b\u0430\u043c (TCT)"},"content":{"rendered":"

\u041f\u043e\u0437\u0438\u0446\u0438\u043e\u043d\u0438\u0440\u043e\u0432\u0430\u043d\u0438\u0435 \u043f\u0440\u043e\u0434\u0443\u043a\u0442\u0430<\/b><\/strong><\/h4>\n
Burr-control + anti-loading cutting tool for aluminum extrusion processing, fenestration, industrial profiles and non-ferrous cutting<\/h6>\n

Aluminum\/non-ferrous TCT blades target stable cutting with <\/b><\/strong>anti-loading behavior, controlled burrs, and controlled heat<\/b><\/strong>, reducing secondary deburring and rework before assembly. Compared with wood, aluminum is prone to a chain reaction\u2014chip adhesion \u2192 heat \u2192 galling \u2192 burr growth\u2014so geometry and chip evacuation are engineered for the material.<\/b><\/strong><\/p>\n

————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

\u0422\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0438\u0435 \u0445\u0430\u0440\u0430\u043a\u0442\u0435\u0440\u0438\u0441\u0442\u0438\u043a\u0438<\/b><\/strong><\/h4>\n
For aluminum, \u201cmore teeth\u201d isn\u2019t the only answer\u2014hook angle, chip evacuation, anti-loading and runout matter most<\/h6>\n\n\n\n\n\n\n\n\n\n\n\n
\n

\u0421\u043f\u0435\u0446\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f <\/b><\/strong><\/p>\n<\/td>\n

Engineering Notes<\/b><\/strong><\/td>\n<\/tr>\n
Tooth Geometry<\/b><\/strong><\/td>\n\n

Primarily TCG (For burr control); optimized geometries available based on workpiece requirements<\/p>\n<\/td>\n<\/tr>\n

\n

Hook Angle<\/b><\/strong><\/p>\n<\/td>\n

Neutral or negative hook angle: improves stability, reduces material pulling and “grabbing”<\/td>\n<\/tr>\n
Tooth Count<\/b><\/strong><\/td>\n\n

Configured by diameter and application: balances cut quality with chip evacuation<\/p>\n<\/td>\n<\/tr>\n

\n

Kerf<\/b><\/strong><\/p>\n<\/td>\n

Stability is priority; Thin kerf requires higher clamping precision and machine stability<\/td>\n<\/tr>\n
Anti-loading<\/b><\/strong><\/td>\n\n

Waxing \/ Coating \/ Surface treatments (Optional) + Optimized gullet design<\/p>\n<\/td>\n<\/tr>\n

\n

Runout<\/b><\/strong><\/p>\n<\/td>\n

Lower is better: Directly affects cut finish, burr formation, and tool life<\/td>\n<\/tr>\n
Bore\/Arbor<\/b><\/strong><\/td>\n\n

20 \/ 25.4 \/ 30 mm etc. (Bushings\/Reducers available)<\/p>\n<\/td>\n<\/tr>\n

\n

Materials<\/b><\/strong><\/p>\n<\/td>\n

\n

Aluminum extrusions, Plates, copper, Brass, And other non-ferrous metals<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

Key Features<\/b><\/strong><\/h4>\n
Less burrs, less galling, less chip loading\/heat\u2014edges closer to \u201cno secondary finishing\u201d<\/h6>\n
    \n
  • Burr control & edge integrity<\/strong>:<\/strong>\u00a0via TCG behavior;<\/li>\n
  • Optional anti-loading<\/strong>:<\/strong>\u00a0(wax\/coating) reduces chip adhesion and galling;<\/li>\n
  • Controlled heat<\/strong>:<\/strong>\u00a0through better evacuation and lower friction;<\/li>\n
  • Stable cutting feel<\/strong>: <\/strong>with neutral\/negative hook and stable plates reduces grabbing.<\/li>\n<\/ul>\n

    ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

    \u041b\u043e\u0433\u0438\u043a\u0430 \u043e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0438<\/b><\/strong><\/h4>\n
    Aluminum cutting isn\u2019t just separation\u2014it\u2019s turning friction into controlled chips; less loading means less burr and heat<\/h6>\n

    The chain is tooth entry \u2192 chip formation \u2192 chip evacuation. If evacuation fails, chips rub, heat rises, aluminum loads, and galling\/burrs grow. Aggressive hook angles can grab the work; runout\/clamping issues amplify vibration and inconsistency. Selection must include machine stability and process window.<\/strong><\/p>\n

    ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

    Machine Compatibility<\/b><\/strong><\/h4>\n
    Typical machines: miter\/table\/profile saw lines\u2014clamping and support largely determine burrs and safety<\/h6>\n
      \n
    • Miter\/profile saws<\/strong>:<\/b><\/strong>\u00a0prioritize secure clamping; stable hook angles and evacuation design;<\/li>\n
    • Table saws\/jigs<\/strong>:<\/b><\/strong>\u00a0prioritize low runout and straight tracking;<\/li>\n
    • Production lines<\/strong>:<\/b><\/strong>\u00a0prioritize predictable life and sharpening cadence to reduce downtime.<\/li>\n<\/ul>\n

      ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

      \u0418\u043d\u0436\u0435\u043d\u0435\u0440\u043d\u043e\u0435 \u0441\u0440\u0430\u0432\u043d\u0435\u043d\u0438\u0435<\/b><\/strong><\/h4>\n
      Key difference vs wood blades: wood cuts fibers; aluminum is sensitive to loading\/galling, so anti-loading and hook-angle strategy are crucial<\/h6>\n
      TCG vs Other Geometries<\/b><\/strong><\/h5>\n

      TCG is strong for burr control and stable edges; other grinds may be faster on certain profiles but are more process-sensitive.<\/strong><\/p>\n

      Positive vs Negative Hook<\/b><\/strong><\/h5>\n

      Negative hook is more stable and less grabby with better burr control; positive hook can cut faster but increases grabbing\/galling risk unless setups are very stable.<\/strong><\/p>\n

      Anti-Loading Options<\/b><\/strong><\/h5>\n

      Wax\/coating\/surface treatment plus proper gullet design is an effective package to reduce loading and heat.<\/strong><\/p>\n

      ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

      \u0422\u0438\u043f\u043e\u0432\u044b\u0435 \u043f\u0440\u0438\u043c\u0435\u043d\u0435\u043d\u0438\u044f \u0438 \u043e\u0442\u0440\u0430\u0441\u043b\u0438<\/b><\/strong><\/h2>\n

      High-frequency processes in aluminum cutting\u2014fenestration, industrial frames, heat sinks, furniture profiles and non-ferrous components<\/strong><\/p>\n

        \n
      • Windows<\/strong><\/li>\n
      • Curtain walls, Industrial profiles,Solar frames, Pre-machining cut-to-length, Display frames, Copper<\/strong><\/li>\n
      • Brass cutting.<\/strong><\/li>\n<\/ul>\n

        ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

        \u0414\u0438\u0430\u043f\u0430\u0437\u043e\u043d \u0438 \u0440\u0435\u043a\u043e\u043c\u0435\u043d\u0434\u0443\u0435\u043c\u043e\u0435 \u043f\u0440\u0438\u043c\u0435\u043d\u0435\u043d\u0438\u0435<\/b><\/strong><\/h4>\n
        Select by burr target + loading tendency + machine stability\u2014more reliable than tooth count alone<\/h6>\n
          \n
        • Low burr \/ less galling<\/strong>: <\/b><\/strong>TCG + neutral\/negative hook + anti-loading;<\/li>\n
        • Thick profiles\/high load<\/strong>:<\/b><\/strong>\u00a0stronger evacuation and stable plates; use coolant\/lube if needed;<\/li>\n
        • Thin-wall profiles<\/strong>:<\/b><\/strong> clamping\/support is critical to prevent vibration-driven burr growth.<\/li>\n
        • One-line rule:<\/b><\/strong>\u00a0For aluminum, control loading first\u2014TCG + evacuation + anti-loading + low runout beats \u201cmore teeth.\u201d<\/li>\n<\/ul>\n

          ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

          Customization (OEM\/ODM)<\/b><\/strong><\/h4>\n
          OEM\/ODM tailored to your machines and burr standard\u2014geometry, hook angle, anti-loading, assortments and private label packaging<\/h6>\n

          OEM\/ODM available:<\/strong><\/p>\n

          Diameter, bore, tooth count, TCG parameters, hook angle (incl. negative), kerf\/plate thickness, slots\/damping features, wax\/coating (optional), branding\/private label packaging, barcodes and assortment kits.<\/strong><\/p>\n

          ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

          \u041f\u043e\u0447\u0435\u043c\u0443 \u0432\u044b\u0431\u0438\u0440\u0430\u044e\u0442 \u043d\u0430\u0441<\/b><\/strong><\/h4>\n
          Engineering-led selection reduces claims\u2014turn loading\/burr\/heat into manageable parameters, backed by stable supply<\/strong><\/h6>\n

          We translate your customer scenarios\u2014profile thickness, machine platform, burr standard, coolant\/lube constraints\u2014into practical SKUs, backed by batch consistency and reliable lead time for repeat orders and reputation.<\/strong><\/p>\n

          ————————————————————————————————————————————————————————————————————————————————————<\/strong><\/span><\/p>\n

          \u0420\u0435\u043a\u043e\u043c\u0435\u043d\u0434\u0430\u0446\u0438\u0438 \u043f\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u0438\u044e \u0438 \u0445\u0440\u0430\u043d\u0435\u043d\u0438\u044e<\/b><\/strong><\/h4>\n
          Four essentials for non-ferrous cutting: clamping\/support, process window, chip management, and coolant\/lube strategy (optional)<\/h6>\n
            \n
          • Clamping\/support<\/strong>: <\/b><\/strong>secure the work to prevent vibration-driven burr growth and safety issues;<\/li>\n
          • Process window<\/strong>: <\/b><\/strong>if burrs\/galling increase, adjust feed\/RPM first, then move to more conservative hook\/anti-loading;<\/li>\n
          • Chip management<\/strong>:<\/b><\/strong>\u00a0keep chips evacuating, clean buildup to avoid friction heat;<\/li>\n
          • Coolant\/lube (as needed)<\/strong>:<\/b><\/strong>\u00a0for heavy loads\/loading-prone conditions, coolant or wax\/coating helps reduce adhesion.<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

            \u041e\u0431\u0437\u043e\u0440 \u043f\u0440\u043e\u0434\u0443\u043a\u0442\u0430<\/b><\/strong><\/h4>\n
            Non-ferrous cutting relies on three pillars: TCG for burr control, chip evacuation + anti-loading (coating\/wax), and stable plates for vibration\/heat control<\/h6>\n
            TCT blades engineered for aluminum & non-ferrous cutting\u2014anti-loading, burr control and heat control for assembly-ready edges<\/h6>\n

            Typical non-ferrous pain points include burrs, galling, chip loading, and high heat. Engineering controls include:<\/b><\/strong><\/p>\n

              \n
            • TCG\/optimized geometry<\/strong>:<\/strong>\u00a0for burr reduction;<\/li>\n
            • Neutral\/negative hook angles<\/strong>:<\/strong>\u00a0for stability and reduced grabbing;<\/li>\n
            • Chip evacuation + anti-loading<\/strong>:<\/strong>\u00a0via gullet design, surface treatment, wax\/coating;<\/li>\n
            • Stable plates with slots\/tensioning<\/strong>:<\/strong>\u00a0to reduce vibration\/noise and improve consistency.<\/li>\n<\/ul>","protected":false},"featured_media":1265,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[113],"product_tag":[],"class_list":{"0":"post-487","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-aluminum-non-ferrous-blades-tct","8":"first","9":"instock","10":"shipping-taxable","11":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product\/487","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/comments?post=487"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/media\/1265"}],"wp:attachment":[{"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/media?parent=487"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product_brand?post=487"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product_cat?post=487"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/abrasive-paper.com\/ru\/wp-json\/wp\/v2\/product_tag?post=487"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}